HP Kayak XA User Manual page 122

crystal.bk : cryst-4.fb4 Page 106 Monday, March 23, 1998 4:09 AM
Configure/View
Interface Settings Menu
4 Technical Information
Configuring a SCSI Accessory
The Options menu is displayed.
SCSISelect(TM) Utility v1.xxx
Would you like to configure the host adapter, or run the
SCSI disk utilities? Select the option and press <Enter>.
Press <F5> to switch between color and monochrome modes.
Configure/View Host Adapter Settings
SCSI Disk Utilities
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
Use the and keys and the
the SCSISelect utility. Press
menu.
It is recommended that you do not change these settings.
SCSISelect(TM) Utility v1.xxx
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID . . . . . . . . . . . . . . 7
SCSI Parity Checking . . . . . . . . . . . . . . Enabled
Additional Options
Boot Device Options
SCSI Device Configuration
Advanced Configuration Options . . . . . . . . . Press <Enter>
<F6> - Reset to Host Adapter Defaults
BIOS Information
Interrupt (IRQ) Channel . . . . . . . . . . . . . . 15
I/O Port Address . . . . . . . . . . . . . . . . . F800h
106 English
Options
key to make selections in
at any time to return to the previous
. . . . . . . . . . . . . . Press <Enter>
. . . . . . . . . . . Press <Enter>