HP Kayak XA User Manual page 51

crystal.bk : cryst-2.fb4 Page 35 Monday, March 23, 1998 4:09 AM
Completing the Video
Memory Installation
Procedure
NOTE
Video Adapter
Accessories Available
from Other Sources
For XW Models with
HP Visualize FX4
4 Replace the video adapter in the computer. Carefully slide the board
back into its accessory slot. Firmly press the board into the socket.
Make sure that the board slides into the socket completely and does
not touch components on other boards. Secure the video adapter.
5 Install any other accessories before replacing the cover (see
page 27). Reconnect all cables and power cords.
1 Switch on the PC Workstation.
2 Check the HP Summary Screen to verify the new configuration
(refer to "The HP Summary Screen and Setup Program", on page
101).
If you need to use a special video driver for your application, you may
be asked to insert the CD-ROM or diskette containing the driver.
Additional accessories, including memory upgrades and a video
MPEG module, are available for your video adapter. However, these
accessories cannot be ordered from HP. Contact your dealer for more
details about these accessories.
To add a texture module to the HP Visualize FX4, refer to the Texture
Module Accessory User's Guide shipped with this accessory.
2 How to Install Accessories Inside Your PC Workstation
Installing Memory
English 35