Dns - Gestetner DSm725e Network Manual

❖ Specifying the number of concurrent connections
msh> diprint con {multi | single}
• The above command specifies the number of concurrent diprint connec-
tions. Specify "multi" for multiple connections or "single" for a single con-
nection.
• The default is "multi".

dns

Use the "dns" command to configure or display DNS (Domain Name System)
settings.
❖ View settings
The following command displays current DNS settings:
msh> dns
❖ DNS server configuration
The following command enables or disables the IP DNS server address:
msh> dns "number" server "server address"
The following command displays a configuration using the IP address
192.168.15.16 on a DNS 1 server:
msh> dns 1 server 192.168.15.16
• You can register up to three IP DNS server numbers.
• You cannot use "255.255.255.255" as the DNS server address.
❖ Dynamic DNS function setting
msh> dns "interface_name" ddns {on|off}
• You can set the dynamic DNS function "active" or "inactive".
• {on} means "active" and {off} means "inactive".
• wlan can be specified only when the IEEE 802.11b interface is installed.
Interface name
ether
wlan
❖ Specifying the record overlap operation
msh> dns overlap {update|add}
• You can specify operations performed when records overlap.
• update
To delete old records and register new records.
• add
To add new records and store the old records.
• When CNAME overlaps, it is always changed, irrespective of settings.
Remote Maintenance by telnet
Interface configured
Ethernet interface
IEEE 802.11b interface
2
63