Table of Contents
Advertisement
Section 3 - Configuration
This window allows you to save your configuration file to a hard drive, load configuration settings from a hard drive, and restore
the router's factory default settings.
Save Settings to
Use this option to save the current router configuration
Local Hard Drive:
settings to a file on the hard disk of the computer you are
using. First, click the Save button. You will then see a file
dialog, where you can select a location and file name for
the settings.
Load Settings
Use this option to load previously saved router configuration
from Local Hard
settings. First, use the Browse button to find a previously
save file of configuration settings. Then, click the Upload
Drive:
Settings button to transfer those settings to the router.
Restore to
This option will restore all configuration settings back to
Factory Default
the settings that were in effect at the time the router was
Settings:
shipped from the factory. Any settings that have not been
saved will be lost, including any rules that you have created.
If you want to save the current router configuration settings,
use the Save button above.
Clear Language
Click Clear to remove installed language packs.
Pack:
Reboot Router:
Click the Reboot button on the left side of the window to
restart the router.
D-Link DIR-605L User Manual
Save and Restore Settings
42
Advertisement
Table of Contents
