Show Switch; Config Account Username - D-Link DXS-1210 Series User Manual

5 Command Line Interface
Example usage:
To display IPv6 interface settings:
DXS-1210-12TC> show ipv6 interface 1 brief
vlan1 is up, IPv6 is enabled
Link-local address:
fe80::ee22:80ff:fe77:2016, Link status is up
Total Entries: 1
DXS-1210-12TC>

show switch

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the switch information:
DXS-1210-12TC> show switch
System Name
System Location
System Contact
System Time
System hardware version
System firmware version
System boot version
System serial number
MAC Address
DXS-1210-12TC>

config account username

Purpose
Syntax
Description
To display information about the Switch.
show switch
The show switch command displays the status of the switch.
None.
None.
:Switch
:
:
:27/04/2011 18:25:37
:A1
:V1.00.021
:V1.00.003
:S34F1E8000036
:ec-22-80-77-20-16
To configure the configuration of user account on the Switch.
config account username <string <32> privilege <short <1-
15>> { nopassword | password <string <32>}
The config account username command sets the administrator
106
D-Link DXS-1210 Series User Manual