StarTech.com 3M1A3SG-MONITOR-ARM User Manual page 36

(Optional) If the Cables or Cable Bundles Bundles are too
6.
large to be routed under the Cable Management Covers,
use a Phillips Head Screwdriver to install the M5x8mm
Screws (x 2) and secure the Hook and Loop (Spring Arm)
onto the Spring Arm. The Cable Management Covers will
not be used anymore. (Figure 25. (Figure 25)
(Optional) Use the Hook and Loop (Spring Arm) to create
7.
Cable Bundles under the Spring Arms and Swivel Arms.
(Figure 26)
Route the Cable(s) through the Tool Holder.
8.
For additional self-service support options and community forums, please visit: www.StarTech.com/support
Figure 24
23