Danfoss iC7 Series Operating Manual page 9

iC7 Series Cooling Modules
Operating Guide
2 Safety
2.1 Safety Symbols
The following symbols are used in this guide:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
2.2 General Safety Considerations
LACK OF SAFETY AWARENESS
This document gives important information on how to prevent injury and damage to the equipment or your system. Ignoring
them can lead to death, serious injury, or severe damage to the equipment.
-
Make sure to fully understand the dangers and safety measures incurred in your application.
For US and Canadian markets:
NOTE! Download the English and French product guides with applicable safety, warning and caution information from
www.danfoss.com/en/service-and-support/.
REMARQUE Vous pouvez télécharger les versions anglaise et française des guides produit contenant l'ensemble des informations
de sécurité, avertissements et mises en garde applicables sur le site https://www.danfoss.com/en/service-and-support/.
To install and operate this product safely:
1. Check that the content of the delivery is correct and complete.
2.
Never install or start up damaged units. File a complaint immediately to the shipping company, if you receive a damaged
unit.
3.
Follow the instructions in this document and the specific product manuals.
4. Make sure that all personnel working on or with the product have read and understood this manual and the additional
product-specific manuals. Do not hesitate to contact Danfoss, if you are unclear of the given information, or if you are miss-
ing information.
5. There can be sharp edges in the product that can cause cuts. Be careful to avoid injuries and wear the appropriate safety
equipment when you do mounting, cabling, or maintenance operations.
2.3 Target Group and Necessary Qualifications
Correct and reliable transport, storage, installation, operation, and maintenance are required for the trouble-free and safe operation
of the cooling modules. Only qualified personnel are allowed to perform all related activities for these tasks. Qualified personnel
are defined as properly trained staff, who are familiar with and authorized to install, commission, and maintain equipment, systems,
and circuits in accordance with pertinent laws and regulations. Also, the qualified personnel must be familiar with the instructions
and safety measures described in this guide and other relevant guides. If you are not a qualified electrician, do not perform any
electrical installation or troubleshooting activities.
Danfoss A/S © 2022.02
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
W A R N I N G
https://
AQ339830072437en-000202 / 172F0589 | 9
Safety