Danfoss iC7 Series Operating Manual page 10

iC7 Series Cooling Modules
Operating Guide
Safety
2.4 Designated Use
Installing and operating a Danfoss product not following the following preconditions is regarded as non-designated use. Danfoss
does not take any liability for non-designated use.
Danfoss products are units intended for installation in electrical systems. They comply with the requirements of various directives
and certifications. To see all valid certifications for your product, check the product label of your product.
When the product is installed in machinery or system, these have to comply with relevant national regulations.
In any case, the product and its components have to be operated in accordance with all national Occupational Safety & Health regu-
lations and directives.
Operation of Danfoss products is only allowed under observance of the respective EMC regulations.
Operation of Danfoss products is only allowed under observance of the specifications and requirements given on the product label
and in the product-specific documentation.
Only use spare parts approved and provided by Danfoss. Using other spare parts can damage the product.
2.5 Safe Operation
Keep all doors and covers closed during operation of the cooling module.
Drive components and accessories can still be live and connected to mains, even after the operation indicators are no longer illumi-
nated.
When working with the cooling module together with the AC drive, also follow the safety instructions in the iC7 Series Liquid-
cooled System Modules Operating Guide to prevent any accidents. Retain these operating instructions during the entire life cycle of
the cooling module.
10 | Danfoss A/S © 2022.02 AQ339830072437en-000202 / 172F0589