Danfoss iC7 Series Operating Manual page 15

iC7 Series Cooling Modules
Operating Guide
1 Lifting point
4. Lift the cooling module into a vertical position.
5. Lift the cooling module to the required location.
Horizontal lifting of the standalone cooling module
1. Remove the plywood package frame and the cooling module fixing brackets.
2. Use a lifting device that is sufficiently strong for the weight of the cooling module.
3. Attach the lifting device in the 4 lifting points.
1
Illustration 3: Horizontal Lifting of the Standalone Cooling Module
1 The lifting points
4. Lift the cooling module to the required location.
5. Lift the cooling module into a vertical position.
Danfoss A/S © 2022.02
1
Receiving the Product
AQ339830072437en-000202 / 172F0589 | 15