Presser Feet / Feed Dogs; Changing The Presser Foot - Brother PC-6500 Operation Manual

PRESSER FEET / FEED DOGS

Changing the presser foot

It may be necessary to change the presser foot depending on the stitch that is selected.
1
1
14
1. Press the needle position button to raise the needle, and
then turn off the sewing machine.
2. Raise the presser foot lever.
2
3. Press the black button located at the back of the presser
foot holder to release the foot.
1 Presser foot holder
4. Place the other presser foot below the holder so that the
presser foot pin is aligned with the slit in the holder.
5. Lower the presser foot lever so that the presser foot pin
snaps into the notch in the presser foot holder.
1 Notch in presser foot holder
2 Presser foot pin
1
2