Brother PC-6500 Operation Manual page 106

3. Set the main power switch to "I" to turn on the
sewing machine.
CAUTION
– Do not insert the card in any direction
other than that described above, and do
not force it into the slot, otherwise the
card or the machine may be damaged.
– When the card is inserted, it should appear
as shown in the illustration at the left.
Trying to push the card in any further will
damage the connector.
– Always turn off the main power switch
before inserting
embroidery card (memory card).
– Always keep the memory card in its case
when it is not being used.
4. Press .
5. The pattern selection screen for the inserted
memory card is displayed. [The illustration at
the left shows the Transportation card No.2
(part code SA299, X58321-001) (optional).]
Note
If the screen shown at the left is not displayed,
press the EMBROIDERY key before pressing
.
6. Select the desired pattern in the same way as
you select a one-point pattern. (Refer to page
101 for more details.)
or removing the
103