Memory; Saving Character Combinations In The Memory - Brother PC-6500 Operation Manual

MEMORY

You can save up to 5 different character patterns that you have created and use them again later.

Saving character combinations in the memory

1
110
Example:
1. Select a font, and then type in the text to
2. Press the MEMORY button.
1
3. Press the MEMORY 1 key.
Note
– If a pattern is saved in an address where
– Do not turn off the power while a pattern is
– It takes approximately 10 seconds for a
To save the character pattern
"Girl" in memory address 1
create the pattern.
1 MEMORY button
1 If a pattern has already been saved in
memory address 1, it is displayed on the
screen. Press the NEXT and PREV keys
to look for a memory address that is either
empty or contains a pattern that can be
deleted.
another pattern has already been saved, the
old pattern is deleted.
being saved (while the message "Saving" is
displayed).
pattern to be saved. For details on retrieving a
pattern which has been saved, refer to page
101.
Once the pattern has been saved, the display
returns to the previous screen.