Brother PC-6500 Operation Manual page 130

This message appears when the STITCH ADJUST key is
pressed before selecting a pattern.
This message appears when the foot controller is used while
the embroidery unit is installed.
This message appears when the entered characters are too
long to fit within the embroidery frame. More characters may be
added if the pattern is rotated 90 degrees.
This message appears when you try to save a pattern design
while using the MY CUSTOM STITCH function before the
TM
stitch has been completely created and the END key is pressed,
or when the start/stop button is pressed before the frame
pattern has been completely created.
This message appears when the pattern that you tried to store
could not be stored.
This message appears when trying to retrieve a pattern, but no
patterns have been stored.
This message appears when trying to retrieve a pattern from a
memory card that is not inserted.
127