Automatic Thread Cutting - Brother PC-6500 Operation Manual

AUTOMATIC THREAD CUTTING

Before sewing, turn on automatic thread cutting to cut the threads automatically at the end of sewing. This
function is convenient when sewing buttonholes and bar tacks.
1. Select a stitch.
1
2. Turn on automatic thread cutting by pressing
Note
– Automatic reverse/reinforcement stitching
– Pressing
3. Press the start/stop button.
1
Note
If the start/stop button had been pressed to pause
sewing, the beginning reverse/reinforcement
stitches are not sewn.
4. When the end of the stitching is reached,
2
so that it appears as
1 Automatic thread cutting turned on
must also be used when automatic thread
cutting is turned on.
so that it changes back to
turns off automatic thread cutting.
1 Reverse/reinforcement stitches are sewn,
and then sewing starts.
press the reverse/reinforcement stitch button
to sew reverse/reinforcement stitches, stop
sewing, and cut the threads.
2 Reverse/reinforcement stitches are sewn,
sewing stops, and then the threads are cut
automatically.
.
37