Combining A Frame Pattern With A Design - Brother PC-6500 Operation Manual

Combining a frame pattern with a design

1. Create a frame pattern, and then embroider it.
A cross (+) is sewn in the center of the frame after it is
embroidered. This mark can be used as a guide for
positioning characters or other patterns within the frame.
2. Create the inner design, and then press the SET key, then
the LAYOUT key to display the layout screen.
3. Select the center needle position (Make sure the button
appears as .), and then adjust the embroidery pattern
position so that the hole in embroidery foot
Then, embroider the design.
Making badges or decorative patches
1. After embroidering a frame and the inner design, select the
same frame pattern, press
the same frame pattern around the outside of the original
frame so that it is slightly larger than the original.
2. Cut cleanly around the outside frame, following the line of
the outside stitching.
Q aligns with "+".
, as the stitch, and then sew
119