Maintenance; Cleaning; Cleaning The Screen; Cleaning The Machine Surface - Brother PC-6500 Operation Manual

MAINTENANCE

CLEANING

Cleaning the screen

CAUTION
Disconnect the power supply cord from the wall socket before cleaning the screen, otherwise
injuries or an electric shock may occur.
If the front panel is dirty, wipe it gently with a soft, dry cloth. Do not use any organic solvents or detergents.

Cleaning the machine surface

CAUTION
Disconnect the power supply cord from the wall socket before cleaning the machine surface,
otherwise injuries or an electric shock may occur.
If the surface of the machine is dirty, lightly soak a cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning it once with a wet cloth, wipe it again with a dry cloth.

Cleaning the shuttle

CAUTION
Disconnect the power supply cord from the wall socket before cleaning the shuttle, otherwise
injuries or an electric shock may occur.
Sewing performance will suffer and bobbin thread detection will become unreliable if dust collects in the
shuttle; therefore, it should be kept clean at all times.
122