Blind Hem Stitching - Brother PC-6500 Operation Manual

BLIND HEM STITCHING

1 2
1
4
54
1
4
1
R
Blind hem stitch
1 for sewing fabric other than stretch fabric
2 for sewing stretch fabric
1. Fold the fabric and baste it as illustrated.
Then, fold the fabric once again as shown.
1 3/16" (0.5 cm)
2 Right side of fabric
3 Wrong side of fabric
4 Basting stitch
2. Attach blind hem foot R, lower the presser
foot lever, and position the fabric under the
presser foot so that the edge of the folded
hem touches the guide of the presser foot.
1 Guide
2 Folded hem
3. With the STITCH WIDTH keys, adjust the
needle position so that the needle slightly
catches the fold of the hem, and then sew the
fabric.
1 Needle drop point
Note
If automatic thread cutting and automatic
reverse/reinforcement stitching are turned on
before you start sewing, pressing just the
start/stop button
reinforcement stitches before sewing. In addition,
pressing the reverse/reinforcement stitch button
at the end of the stitching automatically sews
reinforcement stitches, trims the threads and
stops the machine.
4. Turn over the fabric and remove the basting
stitch.
1 Wrong side of fabric
2 Right side of fabric
R
automatically sews