Brother PC-6500 Operation Manual page 94

6. Insert the fabric and inner frame back into the outer frame
without allowing the embroidery sheet or the fabric to move
out of place.
1 Outer frame
2 Inner frame
3 Right side of fabric
Note
Press down firmly until the tops of the outer frame and inner
frame are aligned.
7. Tighten the screw by hand.
1 Tighten
Note
To avoid stripping the screw, do not use a screwdriver to tighten
it.
1
8. Check that the center of the pattern has remained in the
1
correct position, and then remove the embroidery sheet
before starting to embroider.
1 Fingerhole for removing embroidery sheet
2
1
3
91