Height Of The Feed Dogs - Brother LS-1717 Service Manual
Hide thumbs
Also See for LS-1717:
- Instruction manual (82 pages) ,
- Parts reference list (15 pages) ,
- Quick setup (2 pages)
Table of Contents
Advertisement
Height of the feed dogs
Standard
• The feed dog teeth should be 0.9 - 1.1mm above the needle plate at the highest position.
Adjustment
1. Loosen the setscrew
on the vertical feed arm
.
2. Loosen the fixation screw of the eccentric nut
.
3. Turn the eccentric nut
to make adjustment.
4 Retighten the fixation screw of the eccentric nut
.
5. Retighten the setscrew
.
- 10 -
Hide quick links:
Advertisement
Table of Contents
