Lcd Density; Adjusting The Density With The Main Power Switch - Brother PC-6500 Operation Manual

LCD DENSITY

At times, changes in the ambient temperature may make all or part of the screen light or darker; this is not
the sign of a malfunction. If the screen becomes difficult to read, adjust its density.
Note
The screen may become dark immediately after the power is turned on. This is a feature of the light that
illuminates the screen, and is not the sign of a malfunction. The screen will return to its normal level of
brightness after approximately 10 minutes.

Adjusting the density with the main power switch

Adjust the screen
density.
Light
After making the
adjustment, turn the
Dark
power off, then on
again.
1. While pressing anywhere in the LCD, turn the
2. Adjust the density of the LCD.
1
2
3. After making the adjustment, turn the machine
sewing machine off, then back on again.
To make the LCD lighter, press either the
SEWING key or the MY CUSTOM STITCH
key.
To make the LCD darker, press either the
OPERATION GUIDE or the STITCH ADJUST
key.
The density of the LCD changes each time
one of these keys is pressed.
1 Press this key to make the density lighter.
2 Press one of these keys to make the
density darker.
off, then back on again.
TM
11