Embroidering Onto Small Pieces Of Fabric Or In Corners - Brother PC-6500 Operation Manual

Embroidering onto small pieces of fabric or in corners

Use stabilizer material to provide extra support while embroidering. After embroidering is completed,
carefully remove the stabilizer material. Use stabilizer material which is specially designed for
embroidering.
2
1
1
1
3
2
2
Case A
1 Fabric
2 Iron on the stabilizer material. (If you do not
wish to use an iron, attach the stabilizer
material with a basting stitch.)
3 Stabilizer
Case B
1 Fabric
2 Stabilizer
Case C
1 Ribbon (Secure with double-sided tape.)
2 Stabilizer
Note
Temporary spray-on adhesive can also be used
to secure unusually shaped objects. If adhesive is
used, some glue may get on the presser foot,
needle and needle plate. After finishing
embroidering the appliqué pattern, clean away
the glue.
121