Automatic Reverse/Reinforcement Stitching - Brother PC-6500 Operation Manual

AUTOMATIC REVERSE/REINFORCEMENT STITCHING

Before sewing, turn on automatic reverse/reinforcement stitching to sew reverse stitches (stitches sewn in
the reverse direction when sewing straight stitches) or reinforcement stitches (three stitches sewn on top of
each other when sewing stitches other than straight stitches) automatically at both the beginning and the
end of the stitching to secure it.
36
1. Select a stitch.
1
2. Turn on automatic reverse/reinforcement
Note
– Be sure to place the edge of the fabric at least
– Pressing
3. Press the start/stop button.
1
Note
If the start/stop button had been pressed to
pause
reinforcement stitches are not sewn.
4. When the end of the stitching is reached,
2
stitching by pressing
.
1 Automatic reverse/reinforcement stitching
turned on
3 to 4 stitch lengths behind the presser foot so
that the reverse/reinforcement stitches can be
sewn.
so that it changes back to
turns off automatic reverse/reinforcement
stitching.
1 Reverse/reinforcement stitches are sewn,
and then sewing starts.
sewing, the beginning
press the reverse/reinforcement stitch button
to sew reverse/reinforcement stitches and
stop sewing.
2 Reverse/reinforcement stitches are sewn,
and then sewing stops automatically.
so that it appears as
reverse/