Sewing Bar Tacks On Thick Fabrics; Adjusting The Bar Tack Width; Adjusting The Stitch Length Of The Bar Tack - Brother PC-6500 Operation Manual

Sewing bar tacks on thick fabrics

Adjusting the bar tack width

1 2

Adjusting the stitch length of the bar tack

1 2
6. Gently hold the end of the upper thread, and then press the
start/stop button to start the machine. Once sewing is
3
completed, the machine automatically sews reinforcement
5
stitches, and then stops.
Note
– If automatic thread cutting is turned on before you start
sewing, both threads are automatically cut after the
reinforcement stitches are sewn.
– If the fabric does not feed (for example, because it is too
thick), press the STITCH LENGTH key
stitch length.
Place a piece of folded fabric or cardboard beside the fabric
being sewn to level off the buttonhole foot and allow for easier
feeding.
1 Buttonhole foot
2 Folded fabric or cardboard
1
2
Press the STITCH ADJUST key, and then use the STITCH
WIDTH keys
1 Pressing STITCH WIDTH key
3
the bar tack.
2 Standard bar tack width
3 Pressing STITCH WIDTH key
the bar tack.
Press the STITCH ADJUST key, and then use the STITCH
LENGTH keys
bar tack.
1 Pressing STITCH LENGTH key
3
stitch length.
2 Standard bar tack stitch length
3 Pressing STITCH LENGTH key
stitch length.
Note
If the fabric does not feed (for example, because it is too thick),
press the STITCH LENGTH key
length.
and to adjust the width of the bar tack.
increases the width of
decreases the width of
and to adjust the stitch length of the
lengthens the bar tack
shortens the bar tack
to increase the stitch
to increase the
61