Eyelet Stitching - Brother PC-6500 Operation Manual

EYELET STITCHING

Use this stitch for making eyelets, such as on belts.
1
L M
1 Eyelet
1. Press the STITCH ADJUST key, and then select the eyelet
size.
S
(
Shown in actual size.)
2. Attach presser foot N.
3. Check that the needle drops at the desired position, lower
the presser foot lever, and then start sewing. Once sewing
is completed, the machine automatically sews reinforcement
stitches, and then stops.
1 Needle drop point
Note
If automatic thread cutting is turned on before you start sewing,
both threads are automatically cut after the reinforcement
stitches are sewn.
4. Make a hole in the center with an eyelet punch.
L (large): 9/32" (7.0 mm)
M (medium): 15/64" (6.0 mm)
S (small): 13/64" (5.0 mm)
N
65