Mb Selectable Modes; Nenen Ewonan Anane Na Wanan Ene; W Scan Resume; Bb Tuner Type - Icom IC-707 Instruction Manual

31
6 SET MODE
Wi Selectable modes
If required, selectable mode can be restricted.
"NN
OFF ON Main dial
— Initial setting before shipping: all modes ON
Mi Beep tone
For switch operation, the speaker emits beep tones.
If required, beep tones can be turned OFF.
OFF "PN ON
Q Main dial
— Initial setting before shipping: ON
According to requirements, scan resume condition
can be selected.
OFF KAN ON
Main dial
— Initial setting before shipping: ON
According to an optional HF antenna tuner, select a.
tuner type.
AH-3 "FN AT-160
Main dial
— Initial setting before shipping: AH-3
Select ON or OFF for each mode:
— ON: The mode is selectable.
— OFF: The mode is not selectable.
You can inhibit not-used modes. This is convenient
for example:
— When an optional UI-9 FM UNIT is not installed,
turn FM mode and FM tone mode OFF.
— When an optional FL-52A or FL-53A CW NAR-
ROW FILTER is not installed, turn CW narrow
mode OFF.
This setting does not affect modes for memory
channels. A mode in each channel can be used.
Select ON or OFF:
— ON: The speaker emits beep tones for switch
operation.
— OFF: The speaker does not emit beep tones for
switch operation.
Select ON or OFF:
— ON: When a signal is received and the squelch
opens, the scan pauses 10 sec. When a signal
disappears while the scan pauses, the scan re-
sumes after 2 sec.
— OFF: The scan is cancelled when a signal is
received and the squelch opens.
Select AH-3 or AT-160:
— AH-3: For an optional AH-3 HF AUTOMATIC AN-
TENNA TUNER.
— AT-160: For an optional AT-160 HF AUTOMATIC
ANTENNA TUNER.