Black Box EMERALD DESKVUE User Manual page 63

CHAPTER 3: APPLICATION
Table 3-13 explains options for items in the Workspace List.
ITEM
Add New button
Connect/Terminate button
NOTE: After you connect to the workspace, when you hover over a tile, a thin green border appears around the tile to
show that the tile is active.
You can also hover the mouse pointer over the top right corner of a tile right below the close button to obtain access
to additional options, shown in Figure 3-79 below:
NOTE: Active options are shaded in blue. If an option is not active, click on the button to make it active.
TABLE 3-13. UPDATED WORKSPACE SCREEN OPTIONS
DESCRIPTION
Click on this button to define and configure a new workspace. This button was
explained in "3.9.1: Add New Workspace."
Click on the "Connect" button to connect to the workspace. The "Connect" button
changes to a "Terminate" button after the connection is established. Click on the
"Terminate" button to end the established connection.
NOTE: In newer firmware, the "Terminate" button cannot be easily seen as it is
behind the top level window. Using hot key, X will disconnect the workspace and
display the workspace page once again.
FIGURE 3-79: ADDITIONAL TILE OPTIONS
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
63