Black Box EMERALD DESKVUE User Manual page 28

CHAPTER 3: APPLICATION
ITEM
Reboot
Network
28
TABLE 3-7. TRANSMITTER SETTINGS (CONTINUED)
DESCRIPTION
You can power cycle the transmitter by using the "Reboot" button. You will need to
confirm the action by clicking on the "YES" button or cancel the action by clicking on
the "NO" button, as shown in Figure 3-25 below:
Use the options shown in Figure 3-26 below to change the transmitter's IP address,
Network Mask, and/or Default Gateway and to configure LACP, if needed.
1.877.877.2269
FIGURE 3-25: TRANSMITTER REBOOT SCREEN
FIGURE 3-26: NETWORK SETTINGS OPTIONS
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269