Usb Type-C Port (Usb4 #0); Table 9 X4 - Usb Type-C Port Source Power Profiles; Table 10 X4 - Usb Type-C Port Sink Power Profiles - Congatec conga-HPC/3.5-Mini User Manual

4.7

USB Type-C Port (USB4 #0)

The conga-HPC/3.5-Mini provides one USB Type-C
DisplayPort Alternate Mode. This port also supports Dual-Role Power (DRP).
The supported source power profiles are listed in the table below:
Table 9 X4 - USB Type-C Port Source Power Profiles
Profile Voltage (V)
1 TBD
2 TBD
3 TBD
4 TBD
The supported sink power profiles are listed in the table below:
Table 10 X4 - USB Type-C Port Sink Power Profiles
Profile Voltage (V)
1 TBD
2 TBD
3 TBD
4 TBD
The USB Type-C ® port is routed from the USB4 #0 signals of the COM-HPC
(PD) controller (TI TPS65992D)
Note
1. Ensure the USB cable is rated for the intended power profile.
2. The conga-HPC/3.5-Min can be powered via this port.
3. For SML0, use address TBD on your module. Otherwise, the retimer on the conga-HPC/3.5-Mini will not work.
4. For SML1, use address TBD on your module. Otherwise, the PD controller on the conga-HPC/3.5-Mini will not work.
Copyright © 2024 congatec GmbH
port (X4). Depending on the module, this port can support up to 40 Gbps operation and
®
Current (A) Power (W)
TBD TBD
TBD TBD
TBD TBD
TBD TBD
Current (A) Power (W)
TBD TBD
TBD TBD
TBD TBD
TBD TBD
.
4
1
X4
1,2
® connector via a retimer (Intel
FMC1m001
® JHL9040R) 3 and Power Delivery
25/41