Subscribe to Our Youtube Channel
Related Manuals for Congatec conga-QMX8-Plus
Summary of Contents for Congatec conga-QMX8-Plus
- Page 1 Sample Distribution Set for congatec Qseven® 2.1 Development Quick Start Guide Revision 1.0 Copyright © 2021 congatec GmbH QX8P_SDS_q10...
-
Page 2: Intended Audience
In no event shall congatec GmbH be liable for any This quick start guide provides information about the contents of the incidental, consequential, special, or exemplary damages, whether based conga-QMX8-Plus sample distribution set and how to set it up. -
Page 3: Warranty
GmbH, our products, or our website. congatec GmbH shall in no event be liable to the end user for collateral or consequential damages of any kind. congatec shall not otherwise be liable Certification for loss, damage or expense directly or indirectly arising from the use of the product or from any other cause. -
Page 4: Pinout Description
The pinout description lists which signals of the NXP i.MX 8M Plus Quad processor are routed to the Qseven connector. ® Part # Rev. Name Description Use the link below to directly download the conga-QMX8-Plus pinout as an Excel file: 016620/ conga-QMX8-Plus Qseven 2.1 engineering sample module ®... -
Page 5: Hardware Setup
3. USB 3.0 is only supported on port 0. USB ports 5, 6 and 7 are not supported. For more information, refer to section 5.2.7 "Universal Serial Bus (USB)" of the conga-QEVAL/Qseven 2.0 ARM User's Guide. 4. Default device tree supports HDMI ® (autodetect) and LVDS (1024x768@75Hz) video output. Copyright © 2021 congatec GmbH QX8P_SDS_q10... -
Page 6: Boot Process
Software Boot Process The conga-QMX8-Plus boot process starts at Power On Reset (POR), where the hardware reset logic forces the ARM core to begin execution. The Building the Image on-chip boot ROM loads the bootloader. To build the Linux operating system image for the conga-QMX8-Plus,... -
Page 7: Additional Information
Defines the startup command of the bootloader, i.e. how the system performs the boot process. speed up the boot process significantly, install the root filesystem onto the onboard eMMC device. In case of questions, contact congatec technical fdt_file "imx8mp-cgtqx8p.dtb" The device tree blob, might be exchanged in order to enhance functionality.
Need help?
Do you have a question about the conga-QMX8-Plus and is the answer not in the manual?
Questions and answers