Getting And Applying Contracts - Check Point HARMONY R81 Administration Manual

n SmartConsole. See the
n The Gaia Portal. See the
n The cplic or cpconfig CLI commands. See the

Getting and Applying Contracts

If the license includes -SUBSCR, you must download the contract file and apply it to the server.
If the Endpoint Security Management Server has Internet access, it automatically renews
contracts. By default, the Endpoint Security Management Server looks for new contracts every
two hours.
To change the default time interval:
1. Edit this file:
$CPDIR/conf/downloads/dl_prof_CNTRCTMNGR.xml
2. Change the <interval> value as necessary.
3. Restart Check Point services:
cpstop ; cpstart
To apply a contract manually:
1. Log in to Check Point User Center
2. Click Products.
3. Select Get Contracts File in the drop-down menu at the right of the row.
4. In the window that opens, save the contract file and click Open.
5. Connect with SmartConsole to the Endpoint Security Management Server.
6. Click Menu > SmartUpdate.
7. Select License & Contracts > Updated Contracts > From File.
8. In the window that opens, browse to where you saved the contract file and click Open.
The contract is applied to the Endpoint Security Management Server.
If the Endpoint Security Management Server does not have access to the Internet, prepare the
contract file download from the User Center differently.
R81 Security Management Administration Guide
R81 Gaia Administration Guide
.
R81 Harmony Endpoint Server Administration Guide | 51
Endpoint Security Licenses
.
R81 CLI Reference Guide
.
.