Check Point HARMONY R81 Administration Manual page 37

Important:
SSL connection ports on Security Management Servers R81 and higher
n A Security Management Server listens to SSL traffic for all services on the TCP port
443 in these cases:
If you performed a clean installation of a Security Management Server R81 and
l
enabled the Endpoint Policy ManagementSoftware Blade.
If you upgraded a Security Management Server with disabled Endpoint Policy
l
Management Software Blade to R81 and enabled this Software Blade after the
upgrade.
In these cases, when Endpoint Security SSL traffic arrives at the TCP port 443, the
Security Management Server automatically redirects it (internally) to the TCP port
4434.
Service
Gaia Portal
SmartView Web Application
Management API Web
Services
Check Point
(see
Management API Reference
n If you upgraded a Security Management Server with enabled Endpoint Policy
Management Software Blade to R81, then the SSL port configuration remains as it
was in the previous version, from which you upgraded:
Connection Port to Services on an Endpoint Security Management Server
)
URL and Port
https://<IP Address of Gaia
Management Interface>
https://<IP Address of Management
Server>/smartview/
https://<IP Address of Management
Server>/web_api/<command>
R81 Harmony Endpoint Server Administration Guide | 37