Check Point HARMONY R81 Administration Manual page 423

OneCheck User Settings Policy
n Continue with the New Offline Group wizard or click OneCheck User Settings
to configure the OneCheck User Settings policy settings for the group.
This policy will be the default OneCheck User Settings policy for acquired users
and users created from the deployment users on the computer. The default
policy can be updated with a policy Update.
If users are defined in SmartConsole, you can assign a different OneCheck
User Settings policy to them in SmartEndpoint. If users are acquired and not
defined in SmartConsole, they always get the default policy.
Client Settings Policy
n Continue with the New Offline Group wizard or click Client Settings to configure
the Client Settings policy settings for the group. All authorized users on a
computer use the same Client Settings policy.
Completing the Wizard
n The Wizard shows the version and components in the latest package.
n Click Finish at the end of the New Offline Group wizard.
The Offline Group and all of its configurations and policies are saved. If you do
not click Finish at the end of the Wizard, the group is not saved.
Note - From the Group Details view, click Pre-boot Users to open:
n The Authorized Pre-boot Users list
n The Blocked Pre-boot Users list.
3.
Export the required packages
Export the required packages and put them in the configured shared locations.
To export packages:
In the Users and Computers tab, right-click on the Offline Group and select an option.
R81 Harmony Endpoint Server Administration Guide | 423
Configuring Offline Mode