Check Point HARMONY R81 Administration Manual page 106

1. Open SmartEndpoint and connect to the Endpoint Security Management Server.
2. In the Deployment tab, click Software Deployment Rules.
3. In a Deployment rule, in the Actions column, click an Endpoint Client Version or Do
Not Install, and select Manage Client Versions.
4. Click an option:
n Load the latest supported client version from the internet - Download a zip file
that contains the most recent packages from the
n Load a folder containing client installers - Select a folder that contains
packages from your network.
n Load client installer file - Select one package file to upload. The Dynamic
Package has the .exe extension
n Delete package - Select a package to delete, and click this. Select Save. If the
package is in use, a message shows that you cannot delete it.
In the Package Repository, for Dynamic Packages, the Platform is Any CPU . For
other packages the Platform is either 64 bit or 32 bit .
Configuring a Dynamic Package
After you upload a Dynamic Package to the repository, you can configure the package to
further reduce the size of the package that installs on the Endpoint Security clients.
1. Open SmartEndpoint and connect to the Endpoint Security Management Server.
2. In the Deployment tab, click Packages for Export.
3. Select a Dynamic Package. Those are the packages that have
in the Settings column.
4. In the Settings column, select
Configuration.
5. In the Configure Package window, configure these options:
Page
General
Uploading Client Packages to the Repository
Additional Settings and click Advanced Package
Option
Disable the Endpoint Security Client's user interface -
For unattended machines, such as ATMs. To learn about
packages for ATMs, see sk133174. By default, the client
user interface is included in the package.
R81 Harmony Endpoint Server Administration Guide | 106
Check Point Support Center
Additional Settings
.