Check Point HARMONY R81 Administration Manual page 104

Directory
Dynamic
ATM
Master_FULL_E1
Master_FULL_E1_x64
Master_FULL_NO_NP
Master_FULL_NO_NP_
x64
Master_SBA
Master_SBA_x64
Uploading Client Packages to the Repository
Package
Complete Endpoint Security Client for any CPU (32-bit or 64-
bit). This is a self-extracting executable EXE file with all
components (Blades).
Only the components you select are part of the exported
package, so that it can be much smaller than an exported
Windows MSI package. In contrast, MSI packages include all
the components in the smallest package in the repository that
contains the selected components. You can also configure
the Dynamic Package so that it includes only the installation
prerequisites that you need, for example .NET or Anti-
Malware signatures.
Dynamic packages are optimized for upgrades, so the
package that is downloaded to the Endpoint Security client
includes only the changes from the installed version. This
results in a significant decrease in network traffic. A typical
download size for an upgrade using the Dynamic Package
with all components is less than 200 MB, compared to
hundreds of MB for an MSI package.
Best Practice - Use the Dynamic Package for your client
release.
Dynamic packages are available for release E82.40 and
higher. To use Dynamic Packages for releases E81.40
to E82.30, open a Service Request on the
Support Center .
Endpoint Security client for unattended machines, such as
ATMs (automated teller machines for bank customers). It
runs without a GUI. To learn how to use this package, see
sk133174.
Complete Endpoint Security Client for 32-bit systems
Complete Endpoint Security Client for 64-bit systems
Complete Endpoint Security Client without Anti-Malware for
32-bit systems
Complete Endpoint Security Client without Anti-Malware for
64-bit systems
Harmony Endpoint Client for 32-bit systems
Harmony Endpoint Client for 64-bit systems
R81 Harmony Endpoint Server Administration Guide | 104
Check Point