Adjusting The Limotec Seat Post - Bosch Quadriga Cargoline 11G Translation Of Original Operating Instructions

5.3.3

Adjusting the LIMOTEC seat post

Only applies to pedelecs with this equipment
The rider's body weight exceeds or falls below the

seat post's functional weight.
1 Order new Limotec seat post with suitable
functional weight.
2 Remove existing seat post.
Replacing Limotec A1 and A5
3 Use the seat height formula to calculate the
optimum seat post height for leg length:
Seat height (SH) = inner leg length (I) × 0.9
4 Lower the seat post further into the seat tube.
5 Tighten the seat post Bowden cable in the
frame up to the remote control to the same
length as the seat post was lowered.
6 Trim the seat post Bowden cable on the
handlebars if necessary.
MY24K10 - 63_1.0_01.02.2024
Assembly
81