Bosch Quadriga Cargoline 11G Translation Of Original Operating Instructions page 123

6.4.15.5 Setting up the lock function (optional)
The user account can be used to activate the lock
function. This will create a digital key on the
smartphone, which is required to start the drive
system.
Once the lock function is switched on, the pedelec
can only be put into use if:
• the configured smartphone is switched on,
• the smartphone is charged sufficiently and
• the smartphone is directly next to the on-board
computer.
If the key is not immediately verified on the
smartphone, the battery level indicator and the
display of selected level of assistance on the
pedelec flash white to indicate a search for the
key.
If the key is found, the battery level indicator
flashes white. The last configured level of
assistance is displayed. If the key cannot be found
on the smartphone, the pedelec drive system
switches off. The indicators on the on-board
computer go off.
As the smartphone is only used as a contactless
key to switch on the pedelec, the battery and on-
board computer can still be used on another,
unblocked pedelec.
MY24K10 - 63_1.0_01.02.2024
6.4.15.6 Inserting the battery
1 Use a slotted-head screwdriver to pry open the
battery compartment lid on the display rear.
Figure 123: Prying open the battery compartment lid
2 Insert new CR2450 battery. In doing so, ensure
the seal rubber is in the right position.
Figure 124: Inserting the battery with the seal rubber (1)
aligned correctly
3 Press on the battery compartment lid.
 The battery compartment is closed.
Operation
1
123