Bosch Quadriga Cargoline 11G Translation Of Original Operating Instructions page 115

< 55 40... 55
55... 65
...
65... 75 ...
75... 85 ...
85... 95 ...
>95
...
Filling
pressure set 50
in the factory
Maximum
100
pressure
Maximum body
weight
100
[kg]
Table 36: SR SUNTOUR filling pressure table for the air fork
4 Detach high-pressure damper pump.
5 Measure the distance between the fork crown
and the dust seal. This distance is the total
deflection for the suspension fork.
6 Push a cable tie attached temporarily
downwards against the dust seal.
7 Put on normal pedelec clothing (including
baggage).
8 Sit on the pedelec in your usual riding position
and support yourself against an object, such as
a wall or tree.
9 Get off the pedelec without it deflecting.
MY24K10 - 63_1.0_01.02.2024
Recommended air pressure [psi]
40... 55 40... 55
... 55... 65
... 65... 75
... 75... 85
... 85... 100
... +100
50 100
100 130
100 124
10 Measure distance between the dust seal and
 This measurement is the sag. The
11 Increase or reduce the filling pressure.
 The required sag is attained.
12 Tighten the air valve cap onto the air valve
13 If you are unable to achieve the required sag,
40... 55 40... 55
55... 65 55... 65
65... 75 65... 75
75... 85 75... 85
85... 100 85... 100
+100 +100
110
120 120
114 114
the cable tie.
recommended value is between 15% (hard)
and 30% (soft) of the total suspension fork
deflection.
(suspension fork) in a clockwise direction.
the suspension fork will need to be adjusted
internally. Contact specialist dealer.
Operation
40... 55
55... 65
65... 75
75... 85
85... 100
+100
85 80
120
114
115