Adjusting The Limotec Seat Post - Bosch Premio EVO Translation Of Original Operating Instructions

5.3.3

Adjusting the LIMOTEC seat post

Only applies to pedelecs with this equipment
The rider's body weight exceeds or falls below the

seat post's functional weight.
1 Order new Limotec seat post with suitable
functional weight.
2 Remove existing seat post.
Replacing Limotec A1 and A5
3 Use the seat height formula to calculate the
optimum seat post height for leg length:
Seat height (SH) = inner leg length (I) × 0.9
4 Lower the seat post further into the seat tube.
5 Tighten the seat post Bowden cable in the
frame up to the remote control to the same
length as the seat post was lowered.
6 Trim the seat post Bowden cable on the
handlebars if necessary.
MY23P0a - 42_1.0_19.10.2022
Assembly
112