Cleaning The Chain - Bosch Quadriga Cargoline 11G Translation Of Original Operating Instructions

7.3.19 Cleaning the chain

Notice
 Never use aggressive (acid-based) cleaners,
rust removers or degreasers when cleaning
the chain.
 Never use gun oil or rust remover spray.
 Never use chain cleaning devices or chain
cleaning baths.
 Have chain with all-round guard cleaned and
cared for during major inspection.
Place newspaper or paper towels underneath to

collect dirt.
1 Slightly dampen a brush with dish-washing
liquid. Brush both sides of the chain.
2 Dampen a cloth with soapy water. Place the
cloth on the chain.
3 Hold and apply slight pressure while slowly
turning the rear wheel, so the chain passes
through the cloth.
4 Wipe off oily, dirty chains thoroughly with a
cloth and degreaser.
5 Care for the chain after cleaning (see
Section 7.4.16).
7.3.19.1 Cleaning the chain, including all-round
chain guard
Notice
The chain guard must be removed before
cleaning. Contact specialist dealer.
 Clean water hole on the chain guard lower
surface.
 Care for the chain after cleaning (see
Section 7.4.16.1).
MY24K10 - 63_1.0_01.02.2024
Cleaning, maintenance and inspection
170