Omron FZ3 User Manual page 61

Count
Method, objective
[Edge Pitch]
Effective when calculating the number of IC or connector pins.
Reference:
Inspection for
number of pins
[EC Circle Search]
Inspection of the
Effective when inspecting by focusing on circular outline information.
number of screws
Reference:
[Labeling] [Labeling+ (FZ3-Hxxx series)]
Inspection of the Effective when counting the labels and measuring their positions.
number of labels Reference:
Reference:
Measuring dimensions
Method,
objective
Measurement
[Edge Position]
of width of
Effective when measuring the width of measurement objects.
measurement
Reference:
objects
[Edge Position] [Calculation]
Dimension To measure the dimensions of finished products, combine [Edge Position] and [Calculation]. Use
inspection of [Edge Position] to measure position, and [Calculation] to calculate dimensions by calculating the
finished distance between positions.
products Reference:
Reference:
[Edge Position] [Calculation]
Dimension [Edge Position] is effective when measuring the dimensions of circular works and tilted
inspection for measurement objects. Use this processing item to measure position, [Calculation] to calculate
circular shapes the spacing of positions and then the dimensions.
and tilted parts Reference:
Reference:
FZ3 User's Manual
"Processing Item List Manual", "Edge Pitch" (p.124)
"Processing Item List Manual", "EC Circle Search" (p.84)
"Processing Item List Manual, "Labeling" (p.172)
"Processing Item List Manual", "Labeling+" (p.190)
References
"Processing Item List Manual", "Edge Position" (p.114)
"Processing Item List Manual", "Edge Position" (p.114)
"Processing Item List Manual", "Calculation" (p.330)
"Processing Item List Manual", "Edge Position" (p.114)
"Processing Item List Manual", "Calculation" (p.330)
References
Processing Item Selection Guidelines
2
59