Communication
6
Item
Serial
(Ethernet)
Serial
(RS-232C/
RS-422)
Parallel
138
Setting the System Operation Environment
Setting value
[Factory default]
[Normal (UDP)]
●
Normal (TCP)
●
Normal (UDP)
●
(Fxxx series method)
PLC link
●
(SYSMAC CS/CJ/CP/
One)
PLC link (Mitsubishi)
●
[Normal]
●
Normal
●
(Fxxx series method)
PLC link
●
(SYSMAC CS/CJ/CP/
One)
PLC link(Mitsubishi)
●
[Standard Parallel I/O]
Description
Specifies the communication module.
Serial/Ethernet
Normal/Normal (Fxxx series method): Communication
is performed with external devices through Normal
communication. For differences between Normal and
Normal (Fxxx series method), see the following
Reference.
PLC Link: Communication is performed via a link area
with the PLC.
Parallel
Standard Parallel I/O: Communication is performed
via a standard parallel interface.
FZ3 User's Manual