Table of Contents
Advertisement
When processing is not performed normally
<Parameters explanation>
Scene group
Specifies the scene group No. to save (0 to 31).
No.
Specifies the save destination and file name during saving with a definite path.
Save destinations include directories under the following systems.Be sure to attach an "SGP"
Save
extension to the file name.
destination
- USBDisk
- RAMDisk
Important
If the specified file name already exists, this existing file will be overwritten
●
Do not turn off power to the controller until there is a response.
●
(Example)
When data stored in scene group 3 is saved with the file name "LABEL.SGP" in the "IMG01" folder in the
USB memory to which the drive name "USBDisk2" is assigned
<Command>
<Response>
SYSDATA
Acquires settings related to image logging
Acquires settings related to current image logging.
<Command format>
<Response format>
When processing is performed normally
FZ3 User's Manual
Controlling/Outputting through Serial Communication (Non-procedure)
7
201
Advertisement
Table of Contents
