Controlling/Outputting through Serial Communication
(Non-procedure)
This section describes how to set required communication specifications and describes the I/O format
for communication with external devices via serial interface (RS-232C/422 connection) using a
non-procedure method with commands. Communication is performed via the Ethernet using the UDP/IP,
TCP/IP protocols.
Communication Processing Flow (Non-procedure)
This section explains the processing flow of serial (non-procedure) communication.
1:1 connection
Example) Input measurement command and acquire the results
7
Setting Communication Specifications (Ethernet - Non-procedure)
Communication specifications such as communication speed and IP addresses are set for Ethernet
communication.
Reference:
176
Controlling/Outputting through Serial Communication (Non-procedure)
Setting Communication Specifications (RS-232C/422 - Non-procedure) (p.180)
FZ3 User's Manual