Table of Contents
Advertisement
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
The measurement results from the number of times continuous measurement is performed are
Measurement
output as a response.
result
Reference:
Completes continuous measurement
Continuous measurement ends.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
Note
To output measurement results, insert a [Data Output] processing unit in the scene.
●
When the scene does not have a [Data Output] processing unit, only a command response is output.
Reference:
Output Format (Non-procedure) (p.208)
Reference:
"Processing Item List Manual", "Data Output" (p.410)
FZ3 User's Manual
Output Format (Non-procedure) (p.208)
Controlling/Outputting through Serial Communication (Non-procedure)
7
193
Advertisement
Table of Contents
