Opening An Existing Workspace - Renesas R0E424270MCU00 User Manual

R0E424270MCU00 User's Manual

4.4 Opening an Existing Workspace

Follow the procedure below to open an existing workspace.
(1) In the Welcome! dialog box, select the radio button with the caption "Browse to another project workspace" and click on
the OK button.
Figure 4.10 Welcome! dialog box
(2) The Open Workspace dialog box shown below will appear.
Figure 4.11 Open Workspace dialog box
Specify the directory in which the workspaces was created, select the workspace file (extension ".hws"), and click on the
Select button.
(3) The High-performance Embedded Workshop will start, and its state will be restored to the state at the time the selected
workspace was saved. If the emulator was connected at the time, the workspace is automatically connected to the emulator.
If the emulator was not connected but you want to connect it, refer to "4.5.1 Connecting the Emulator" (page 78).
R20UT3586EJ0202 Rev.2.02
Sep.01.21
4. Preparation for Debugging
Page 77 of 233