Renesas R0E424270MCU00 User Manual page 10

R0E424270MCU00 User's Manual
Caution for AC Adapter:
⚫ The DC plug of the AC adapter has the polarity shown below.
⚫ Use an AC adapter which complies with the safety standards of the country where it is to be used.
Cautions to Be Taken for Turning On the Power:
⚫ Turn ON/OFF the power of the emulator and user system as simultaneously as possible.
⚫ When turning on the power again after shutting off the power, wait about 10 seconds.
Cautions to Be Taken for Handling This Product:
⚫ Use caution when handling the main unit. Be careful not to apply a mechanical shock.
⚫ Do not touch the connector pins of the emulator main unit and the target MCU connector pins directly. Static
electricity may damage the internal circuits.
⚫ Do not pull this emulator by the communications interface cable or the flexible cable. And, excessive flexing or
force may break conductors.
⚫ Do not flex the flexible cable excessively. The cable may cause a break.
⚫ Do not use inch-size screws for this equipment. The screws used in this equipment are all ISO (meter-size) type
screws. When replacing screws, use same type screws as equipped before.
⚫ Do not use tape to hold the flexible cable in place, as doing so may lead to the shielding on the surface of the
cable being peeled away.
Caution to Be Taken for System Malfunctions:
⚫ If the emulator malfunctions because of interference like external noise, shut OFF the emulator once and then
reactivate it.
R20UT3586EJ0202 Rev.2.02
Sep.01.21
CAUTION
Precautions for Safety
Page 10 of 233