Connecting Expansion Units And Expansion I/O Units; Mounting Height - Omron CP1L CPU UNIT - 06-2007 Operation Manual

Mounting

Mounting Height

3-3-2

Connecting Expansion Units and Expansion I/O Units

Mounting Method
96
The mounting height is approximately 90 mm.
When a cable is connected to an Option Board, however, the additional height
must be factored in. Always allow for the additional height when considering
the depth of the control panel in which the PLC is to be mounted.
Leave approximately 10 mm of space between the CPU Unit and the Expan-
sion Units or Expansion I/O Units.
CP1L CPU Unit
10 mm
CP1L CPU Unit
with 30 or 40 I/O points
100 mm
Expansion I/O Unit
with 40 I/O points
CP1L CPU Unit
with 14 or 20 I/O points
Expansion I/O Unit
100 mm
with 8, 16, or 20 I/O
points
Expansion Unit
CP1L CPU Unit
Expansion I/O Unit
Analog I/O Unit
Temperature Sensor Unit
CompoBus/S I/O Link Unit
DeviceNet I/O Link Unit
Expansion I/O Units or Expansion Units
A
8 mm
A
8 mm
Unit
40 I/O points
30 I/O points
20 I/O points
14 I/O points
40 I/O points
20 I/O points
16 outputs
8 inputs
8 outputs
MAD01
MAD11
AD041
DA041
Section 3-3
A (mm)
140 ±0.5
120 ±0.5
76 ±0.5
76 ±0.5
140 ±0.2
76 ±0.2
76 ±0.2
56 ±0.2
56 ±0.2
56 ±0.2
76 ±0.2
76 ±0.2
56 ±0.2
56 ±0.2