Output Specifications - Omron CP1L CPU UNIT - 06-2007 Operation Manual

Specifications
Interrupt Inputs and
Quick-response Inputs

Output Specifications

Relay Outputs
56
Input Bits for High-speed Counters
Counter Single phase
High-speed counter 0 CIO 0.00
High-speed counter 1 CIO 0.01
High-speed counter 2 CIO 0.02
High-speed counter 3 CIO 0.03
Pulse plus direction input mode,
Increment mode
Up/down input mode
10.0 µs min.
ON
OFF
2.5 µs 2.5 µs
min. min.
Input bits: CIO 0.04 to CIO 0.09
ON
OFF
50 µs 50 µs
min. min.
With CPU Units with 20, 30, or 40 I/O points, the six input bits from CIO 0.04
to CIO 0.09 can be used as either normal inputs or as interrupt or quick-
response inputs depending on the settings in the PLC Setup. With CPU Units
with 14 I/O points, the four input bits from CIO 0.04 to CIO 0.07 can be used
as either normal inputs or as interrupt or quick-response inputs.
Input bit
CPU Units with 20, CPU Units with
30, or 40 I/O points 14 I/O points
CIO 0.04 CIO 0.04
CIO 0.05 CIO 0.05
CIO 0.06 CIO 0.06
CIO 0.07 CIO 0.07
CIO 0.08 ---
CIO 0.09 ---
Item
Max. switching capacity
Min. switching capacity
Service life Electrical
of relay
Mechanical
ON delay
Phase A
CIO 0.00
CIO 0.02
---
---
Differential phase mode
ON
90%
OFF
50%
10%
ON
OFF
90%
10%
Interrupt inputs Quick-response inputs
Interrupt input 0
Interrupt input 1
Interrupt input 2
Interrupt input 3
Interrupt input 4
Interrupt input 5
2 A, 250 VAC (cosφ = 1)
2 A, 24 VDC (4 A/common)
10 mA, 5 VDC
Resistive 100,000 operations (24 VDC)
load
Inductive 48,000 operations (250 VAC, cosφ = 0.4)
load
20,000,000 operations
15 ms max.
Section 2-2
Phase B Phase Z
CIO 0.01 CIO 0.04
CIO 0.03 CIO 0.05
--- ---
--- ---
20.0 µs min.
90%
50%
10%
90%
50%
10%
T T T T
1 2 3 4
: 2.5 µs min.
T , T , T , T
1 2 3 4
Quick-response input 0
Quick-response input 1
Quick-response input 2
Quick-response input 3
Quick-response input 4
Quick-response input 5
Specification