Omron CJ - 08-2008 Operation Manual page 354

PLC Setup
Polling Unit: Number of Link Words
Programming
Console address
Word Bit(s)
+166 4 to 7 1 to A
Default: 0 (See
note.)
Note: If the default is
set, the number of
words will automati-
cally be 10 (A hex).
Polling Unit: Maximum Unit Number in Serial PLC Link
Programming
Console address
Word Bit(s)
+166 0 to 3 0 to 7
Default: 0
Polled Unit: Serial Communications Mode
Programming
Console address
Word Bit(s)
+160 8 to 11 7: Serial PLC Link
Polled Unit
Default: 0
Polled Unit: Port Baud Rate
Programming
Console address
Word Bit(s)
+161 0 to 7 00: Standard
0A: High-speed
Default: 00
Polled Unit: Serial PLC Link Polled Unit Unit Number
Programming
Console address
Word Bit(s)
+167 0 to 3 0 to 7
Default: 00
306
Settings
This setting specifies the number of words
per node in the Serial PLC Link Area to be
used for Serial PLC Links.
Settings
This setting specifies the highest Polled Unit
unit number that can be connected in Serial
PLC Links.
Note: If a PT is to be connected, it must be
included when counting Units.
Settings
This setting specifies the serial communica-
tions mode that the RS-232C port is to be
used with. It also designates the local node
as a a Serial PLC Link Polled Unit.
Settings
This setting specifies the Serial PLC Link
baud rate.
(See note.)
Note: The setting must be the same for all of
the Polled Units and the Polling Unit using
Serial PLC Link.
Note Set to 115,200 bps when using the CX-Programmer
Settings
This setting specifies the Polled Unit unit
number for the local node on the Serial PLC
Link.
Function
Function
Function
Function
Function
Section 7-1
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)