Omron CJ - 08-2008 Operation Manual page 211

Programming Devices
CX-Programmer Connecting Cables
Unit Unit port
CPU Units Built-in
peripheral
port
Built-in
RS-232C
port
D-Sub,
9-pin,
female
Serial Com- RS-232C
munications Port
Units
D-Sub,
9-pin,
female
RS-232C Cables for a Peripheral Port
Unit Unit port
CPU Units Built-in
periph-
eral port
Using a CQM1-CIF01/02 Cable for a Peripheral Port
Unit Unit port
CPU Units Built-in
periph-
eral port
Com- Computer
puter port communications
DOS D-Sub, 9-pin, Peripheral Bus or
male Host Link
DOS D-Sub, 9-pin, Peripheral Bus or
male Host Link
DOS D-Sub, 9-pin, Host Link
male
Note Before connecting a connector from the above table to the RS-232C port,
touch a grounded metal object to discharge static electricity from your body.
The XW2Z-@@@S-CV Cables have been strengthened against static
because they use a static-resistant connector hood (XM2S-0911-E). Even so,
always discharge static electricity before touching the connectors.
Do not use commercially available RS-232C personal computer cables.
Always use the special cables listed in this manual or make cables according
to manual specifications. Using commercially available cables may damage
the external devices or CPU Unit.
Com- Computer
puter port
DOS D-Sub, 9-pin, Peripheral Bus or
male Host Link
Com- Computer
puter port
DOS D-Sub, 9-pin, Host Link
male
Serial Model
mode
CJ1W-CN226
CJ1W-CN626
XW2Z-200S-CV
XW2Z-500S-CV
XW2Z-200S-V
XW2Z-500S-V
XW2Z-200S-CV
XW2Z-500S-CV
Serial Model
communications
mode
CJ1W-CN118 +
XW2Z-200S-CV/
500S-CV
Serial Model
communications
mode
CJ1W-CN114 +
CQM1-CIF02
Section 3-3
Length Cable notes
2.0 m ---
6.0 m
2 m Use a static-
resistant con-
5 m
nector.
2 m
5 m
2 m Use a static-
resistant con-
5 m
nector.
Length Cable notes
0.1 m+ XW2Z-
@@@S-CV
(2 m or
5 m) models use a
static -resis-
tant connector
Length Cable notes
0.05 m + ---
3.3 m
163